Le precauzioni per l'installazione dei giunti impermeabili dei cavi di comando industriali sono le seguenti:
1. Before installing the industrial control cable waterproof connector, be sure to read the manufacturer's product manual carefully. This is especially important for 10KV and above cables. Think about all the processes before doing it.
2. Do not use too much force when pressing the copper pipe, as long as it is crimped in place, the copper end face after crimping is bound to have many raised points, this must be flattened with a file, and no burrs should be left.
3. The outer semiconductor shield is a semi-conductive material that acts as a uniform electric field outside the insulation of the cable and the joint. Like the inner semiconductor shield, it plays a very important role in the cable and the joint.
4. When making the joint, the inner shielding layer of the joint of the conductor part of the crimping tube must be restored, and a part of the inner semiconductor shield of the cable must be reserved, so that the inner shielding of the connector on the connecting tube can communicate with each other.
In sintesi, ci saranno molte precauzioni durante l'installazione dei connettori stagni del cavo di controllo industriale. Pertanto, sia il costruttore che l'utente devono leggere attentamente il manuale di fabbrica e assicurarsi che non siano in fase di lettura. I problemi che capisci vengono sollevati per risolverli in tempo, in modo da evitare in una certa misura il pericolo.
